How Tool Regrinding Actually Works: Stock Removal, Geometry Recovery, Edge Prep
November 21, 2026 · 铸屹精密
Tool regrinding is not sharpening - it is controlled removal of a thin layer from flank and face so the original geometry returns. This article explains the three stages: measuring how much carbide must be removed, re-cutting clearance and core to spec on a tool grinder, and finishing the edge for the intended material. It shows where hand bench-grinding and CNC equipment diverge: consistency of clearance angle, concentricity, and repeatability across a batch. A closing glossary of what a regrind can and cannot restore - diameter, flute depth, corner radii - helps buyers set honest acceptance criteria for their regrind supplier.