Quality control for Tool Regrinding & Reconditioning

October 14, 2026 · Exactalloy Technical Team

Quality control for Tool Regrinding & Reconditioning, written as a checklist an engineer can act on the same day.

Quick answer: Focus on the three metrics that move fastest: tool cost per part, scrap rate and cycle time. Measure, change one variable, re-measure.

Baseline first

You cannot improve what you have not measured. Record current cost per part, scrap rate and cycle time for a representative job.

Highest-leverage actions

Rigid set-up, correct grade and coating, and a standard tool list deliver most of the gain for the least effort.

Standardise and document

Write the winning parameters into the job sheet so the gain survives shift changes and staff turnover.

Review cadence

Review the metrics monthly, not annually, and re-trial when materials or machines change.

Specifications at a glance

Action	Effort	Typical gain
Measure baseline	Low	Visibility
Standardise tool list	Medium	5–15 %
Optimise parameters	Low	10–25 %
Improve set-up rigidity	Medium	10–30 %

Frequently asked questions

Where should I start?

Measure the baseline for one representative job — everything else follows from that number.

How long before results show?

Parameter and set-up changes show within one shift; standardisation takes one to two months.

Get a quote and technical support

Exactalloy supplies tool regrinding and reconditioning from stock, made-to-order and reground. Send your drawing or specification for a quotation and lead time within 24 hours. Contact us or browse all products.