Can Thread Mills and Taps Be Regrinded? What Happens to Thread Accuracy
November 19, 2026 · 铸屹精密
Thread mills regrind well because their thread profile is generated by the machine path: regrinding the peripheral flutes restores cutting edges while the profile is re-cut to original geometry, and pitch stays intact. Taps are different - the thread form is ground into the tool, so regrinding is essentially confined to the cutting face chamfer (1-3 threads); the actual thread flanks can only be refreshed, not re-formed. This article explains the boundary, what specs to check after each route (pitch diameter, chamfer length, runout), which tap types are worth regrinding and which are not, and a simple acceptance test to run before putting regrind thread tools back into production.